Description:
Drill new water wells or deepen existing water wells by use of standard practices including the use of cable tools, compressed air percussion, rotary, air rotary or reverse circulation rotary methods. Includes installing casing, gravel pack, perforating and sanitary seals. Repair existing wells by sand pumping, jetting, acidizing, swabbing, clean out, re-perforating, swaging, installation of annealed lines and the removal of debris.
Includes photographing interior of wells with the appropriate equipment. Installation of jet and submersible pumps; electrical pump controls and wiring from pump equipment to first readily accessible disconnect; and water line to storage or pressure tank, not to exceed fifty linear feet. Use of test pump to develop a new well, or repair an existing well, when provided in contract, is limited to five horsepower.
Installation of concrete pump bases not to exceed 50 square feet.
Installation of protective fencing when included in original contract.
Testing Requirements:
Contractor's Business Management Examination
Water Well Drilling Examination through the Arizona Department of Water Resources
Experience Requirements:
This license requires a minimum of 2 years of experience. The Arizona Registrar of Contractors may also ask that you submit a minimum of 25 projects covering the scope of the license. Specific forms are required to be submitted with the license application to verify the contractors work history. Our office has these forms at each location for your convenience and although we cannot fill them out for you, we can make suggestions and guide you through the instructions. Give us a call today at 866.254.2367.
Note: The Registrar of Contractors remains the ultimate authority in approving any and all materials submitted for application.